Making Wi-Fi Settings From The Control Panel - Epson ET-M2120 Series User Manual

Adding or Replacing the Computer or Devices
Follow the on-screen instructions.

Making Wi-Fi Settings from the Control Panel

You can make network settings from the printer's control panel in several ways. Choose the connection method
that matches the environment and conditions that you are using.
If you know the information for the wireless router such as SSID and password, you can make settings manually.
If the wireless router supports WPS, you can make settings by using push button setup.
After connecting the printer to the network, connect to the printer from the device that you want to use (computer,
smart device, tablet, and so on.)
Related Information
"Making Wi-Fi Settings by Entering the SSID and Password" on page 180
&
"Making Wi-Fi Settings by Push Button Setup" on page 181
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 182
&
Making Wi-Fi Settings by Entering the SSID and Password
You can set up a Wi-Fi network by entering the information necessary to connect to a wireless router from the
printer's control panel. To set up using this method, you need the SSID and password for a wireless router.
Note:
If you are using an wireless router with its default settings, the SSID and password are on the label. If you do not know the
SSID and password, contact the person who set up the wireless router, or see the documentation provided with the wireless
router.
1. Select Wi-Fi Setup on the home screen.
To select an item, use the
2. Select Wi-Fi (Recommended).
3. Press the OK button to proceed.
4. Select Wi-Fi Setup Wizard.
u d l r
buttons, and then press the OK button.
>
Re-setting the Network Connection
180
> ...
Making Wi-