Advertisement
LEDs
Led status explanation
Steady ON
The heating circuit faults are:
1) Open circuit of the heat sensor.
2) Short circuit of the heat sensor.
3) When the heated area is >50 C. All the above faults are indicated as long as they
exist. When they are restored, they will be erased and not indicated by the indication
LEDs.
Manufacturer
Model Number
Voltage Range
Nominal Power
Connections
Temperature (tc)
Page 4 from 5
Status of LEDs
Description
Normal
Charging
Charger fault, battery not connected
or mains off
Battery duration test (auto or manual)
Battery fault
Light source test
Light source fault
Battery fault and light source fault
Charger and battery fault (or mains off and battery fault)
Charger and light source fault (or mains off and light source fault)
Charger, battery and light source fault (or mains off, battery and light source fault)
1Hz: Heating circuit fault
5Hz: Open circuit of heating resistors
Steady OFF
o
LED MODULE CHARACTERISTICS
GR-938/30L/LT
Flashing in 1Hz or 5Hz
Olympia Electronics S.A
0505175/30L
14-16.5V DC
Cable connection with non-reversible connectors
45 °C max. across the board
GR-939/30L/LT
5.4W
923939016_09_007
Advertisement
