Table of Contents
Advertisement
11. Advanced setup options for the M 7200 SW
Submenu: Cinch Pre Out
The "Cinch Pre Out" submenu is only available in
2.1 mode and is used for configuring the subwoof-
er's stereo outputs. These settings affect all the
audio devices connected to the preamp output
of the M 7200 SW THX Select(e.g., a stereo power
amp with stereo loudspeakers). The reason behind
this signal path is to match the stereo system to
the subwoofer. This means you can achieve the
best possible frequency balance for your listen-
ing environment.
Figure: Cinch Pre Out, Level
Settings available in this submenu:
Figure: Available settings in the "Cinch Pre Out"
submenu
Cinch Pre Out – Level
Figure: Level, Set -12.0 dB
Use the Pre Out Level to reduce the signal's volume
level."0 dB" represents the maximum level, i.e., no
change. Please note that the menu entry is only
applied after you press "Enter" and the
appears. The level set via the menu is saved when
the subwoofer is switched off, and automatically
restored when it is switched back on.
Cinch Pre Out – Delay
Figure: Delay, Set 1.5m
Use this setting to delay the output signal of the
connected stereo speakers. This is advisable when
the stereo speakers are placed closer to the lis-
tener than the subwoofer. Simply enter the delay
value as the distance (in metres) by which the
stereo speakers are closer to the listener. The de-
lay setting is applied after you press "Enter" and
the
symbol appears.
Make sure that if the subwoofer is further away
from the listener, the "Subwoofer Delay" is set to
"0 m" , and conversely if it is closer to the listener,
the "Cinch Pre Out Delay" is set to "0 m" .
Figure: How to calculate the delay distance
symbol
Teufel · LT 7
27
Advertisement
Table of Contents
