6. Connecting the loudspeakers
ON/OFF switch
Use the "O/I" switch to power up the M 7200 SW
THX Select subwoofer once you have connected
the mains power cable.
Please note: When you flick the switch, this may
trigger a peak voltage and cause a thumping
noise from the speaker.
After you switch on the subwoofer's power switch,
the unit is in standby mode. To activate regular
operation, press the "On/Standby" button on the
remote control, or any button on the subwoofer's
front panel.
14 Teufel · LT 7