Table of Contents
Advertisement
11. Advanced setup options for the M 7200 SW
Submenu: Presets
The "Presets" submenu lets you load up the set-
tings for a range of factory-set configurations.
You can also save your own configuration in case
you want to reload it at a later point. This gives
you the freedom to experiment with new settings
without losing the previous state.
Figure: Presets, THX Select -3dB/35Hz
Settings available in this submenu:
Figure: Available settings in the "Presets" submenu
Presets – THX Select – 3dB/35Hz
Figure: THX Select -3dB/35Hz OK?
Use this menu item to load the settings for the
THX Select standard configuration. Press "Enter"
The
symbol indicates that the new setting has
been applied.
Figure: Frequency response for preset: THX
Select(measured curve)
The "THX Select" preset activates the following
settings:
Low-end cut-off frequency: 35 Hz
4
Low-end filter order: 4. order
4
High-end cut-off frequency: 190 Hz
4
High-end filter order: 2. order
4
Parametric filter 1: Frequency = 40
4
Hz, Amount = +2 dB, Quality = 3.1
Parametric filter 2: Frequency = 87
4
Hz, Amount = -8 dB, Quality = 0.5
Parametric filter 3: -
4
Presets – THX Select II – 3dB/25Hz
Figure: THX Select II -3dB/25Hz OK?
Use this menu item to load the settings for the
THX Select II standard configuration.
Press "Enter" The symbol indicates that the new
setting has been applied.
Figure: Frequency response for preset: THX
Select II(measured curve)
The "THX Select II" preset activates the following
settings:
Low-end cut-off frequency: 25 Hz
4
Low-end filter order: 4. order
4
High-end cut-off frequency: 190 Hz
4
High-end filter order: 2. order
4
Parametric filter 1: Frequency = 29
4
Hz, Amount = +3 dB, Quality = 1.9
Parametric filter 2: Frequency = 237
4
Hz, Amount = +3 dB, Quality = 1.7
Parametric filter 3: Frequency = 85
4
Hz, Amount = -9 dB, Quality = 0.5
Teufel · LT 7
29
Advertisement
Table of Contents
