Table of Contents
Advertisement
11. Advanced setup options for the M 7200 SW
Presets – Teufel PS I – 3 dB/30 Hz
Figure: Teufel PS I –3dB/30Hz, OK?
Use this menu item to load Teufel Preset I, which
combines the standard settings of the two THX
Select presets. Press "Enter" . The
cates that the new setting has been applied.
Figure: Frequency response for preset: Teufel PS I
(measured curve)
The "Teufel PS I" preset activates the following
settings:
4
4
4
4
4
4
4
Presets – User Presets LFE
Figure: User Presets LFE, Load settings
Use this menu item to load a previously saved
preset. Press "Enter" . The symbol indicates that
the new setting has been applied.
Press "Up" or "Down" to access the second menu
item, which lets you save the current settings as
a preset.
30 Teufel · LT 7
Low-end cut-off frequency: 30 Hz
Low-end filter order: 4. order
High-end cut-off frequency: 190 Hz
High-end filter order: 2. order
Parametric filter 1: Frequency = 31
Hz, Amount = +3 dB, Quality = 1.9
Parametric filter 2: Frequency = 87
Hz, Amount = -9 dB, Quality = 0.5
Parametric filter 3: -
Figure: User Presets LFE, Save settings
Note that saving your new settings will overwrite
the previously saved preset.
symbol indi-
Advertisement
Table of Contents
