Teufel LT 7 Series Technical Specifications And Operating Manual page 21

10. Setup and configuration of the M 7200 SW
How to use the menu structure
To access a function associated with a menu item,
you need to navigate through a range of menus
and submenus using the buttons below the display.
For example, if you want to load the "THX Select II
-3dB/25Hz" preset, proceed as follows:
Step 1
After the subwoofer is first switched on, the display
defaults to the volume level setting:
Figure: Teufel Subwoofer, Level -21.5dB Mode 5.1
Step 2
Press the "Enter" button to open the subwoofer's
configuration menu. The display now reads:
Figure: Teufel Subwoofer, Subwoofer
Step 3
Repeatedly press the "Down" or "Up" button until
the display shows the "Presets" submenu:
Figure: Teufel Subwoofer, Presets
Step 4
Next, press the "Enter" button to open the "Presets"
submenu. The display now changes to:
Figure: Presets, THX Select -3dB/35Hz
Step 5
Use the "Up" and "Down" buttons to navigate to the
"THX Select II -3dB/25Hz" menu item. You can select
the menu item as soon as it appears in the display:
Figure: Presets – THX Select II – 3dB/25Hz
Step 6
The correct menu item is now selected. To load the
THX Select preset, simply press the "Enter" button.
Your selection is confirmed by the symbol.
Step 7
To exit the menu structure after you have confirmed
your preset selection, press the "Return" button.
Press "Return" twice to get back to the display's de-
fault volume level setting.
Teufel · LT 7
21