BESAFE iZi Flex FIX i-Size User Manual page 2

Table of Contents

Advertisement

Available languages

Available languages

16
10
11
12
19
13
30
14
21
15
24
18
17
26
20
28
22
23
8
Thank you for choosing BeSafe iZi Flex FIX i-Size
! It is important that you read this user manual BEFORE
25
installing your seat. Incorrect installation could endanger
your child.
! Vital information
• For the correct usage of the airbag in combination with the seat;
read the vehicle handbook.
• For the suitable positions in the car, read the vehicle handbook.
• BeSafe recommends to install the seat in all vehicle seat positions
which are intended to be used and check installation, available
space in the vehcile and position of the child, to verify if the seat is
acceptable for your situation.
• iZi Flex FIX i-Size can be installed forward-facing with the ISOFIX
anchorage in a vehicle equipped with ISOFIX anchorage points, in
27
combination with a 3-point belt, approved to UN/ECE Regulation
No.16 or other. When there is no ISOFIX anchorage available in the
vehicle position, iZi Flex FIX i-Size can be installed forward-facing
with a 3-point belt, approved to UN/ECE Regulation No.16 or other.
• iZi Flex FIX i-Size is approved for stature height 100 cm - 150 cm,
in the forward-facing direction.
• When used for stature heights between 135 cm. and 150 cm iZi
Flex FIX i-Size might not fit in all vehicles, due to a low position of
the vehicle roof at the side.
• Before every use, make sure that the 3-point belt is not damaged
or twisted and installed tight.
29
30
• When used without the isofix anchorages connected, the
seat should always be restrained by the vehicle belt when it is
transported without the child.
• When the child is taller then 150 cm. or the shoulders exceed the
highest position of the shoulderbelt guiders, the child must change
to a seat suitable for longer children, normally the vehcile seat.
• After an accident, the seat must be replaced. Although it may
look undamaged, if you were to have another accident, the seat
may not be able to protect your child to the level to which it was
designed.
• Prevent the seat from becoming trapped or weighed down by
luggage, seats and/or slamming doors.
• DO NOT attempt to dismantle a part, which is not intented to be
removed, modify or add any part to the seat. Warranty will be void
9
if non-original parts or accessories are used.
• Never leave your child unattended in the seat.
• Make sure all passengers are informed about how to release your
child in case of emergency.
• Make sure luggage or other objects are properly secured. Unsecured
luggage may cause severe injuries to children and adults in case
of accidents.
• Never use the seat without the cover. The cover is a safety feature
and may only be replaced by an original BeSafe cover.
• Do not use any aggressive cleaning products; these may harm the
construction material of the seat.
• BeSafe advises that child seats should not be bought or sold
second-hand.
• KEEP this user manual with the seat for future use.
• DO NOT use the seat for longer than 8 years. Due to ageing, the
quality of the material may change.
• DO NOT use at home. It has not been designed for home use and
can only be used in a vehicle.
• When the child seat is installed in the car check all the areas where
the child seat might touch the interior. We recommend using a
(BeSafe) protection cover in these places to avoid cuts, marks or
discolouration to the interior of the vehicle, especially in vehicles
with leather or wooden interiors.
• If in doubt, consult either the car seat manufacturer or the retailer.

Advertisement

Table of Contents
loading

Table of Contents