Section 1: Installation Requirements; 1 Requirements For Installation; 1.1 Required Information; 1.2 Required Equipment - Intuicom RTK Bridge-X Installation Manual

Overview
The Raven Phoenix 300 is typically configured to accept CMR or RTCM format RTK
corrections from an Intuicom RTK Bridge
GPS/GNSS reference network. The intended audience for this document is a dealer or
integrator familiar with the Raven Phoenix 300 and general familiarity with the Intuicom RTK
Bridge–X. The Intuicom RTK Bridge–X User Guide covers the steps necessary for its
configuration.

1 Requirements for Installation

1.1 Required Information
In order to operate an Intuicom RTK Bridge–X, you are required to have the necessary
information to access and log in to the Real-Time Network. This information is entered
into the RTK Bridge–X and stored in a profile. More details on setting up an RTK
Bridge–X is available in the RTK Bridge-X manual.
IP address,
•
TCP port,
•
NTRIP mountpoint name,
•
username and password for access to the real-time GPS/GNSS network
•
1.2 Required Equipment

1.2.1 Intuicom Equipment and Accessories

1. Intuicom RTK Bridge–X with activated data provider account (Verizon, AT&T, etc...)
2. Intuicom RTK Bridge–X to DB-9 data/power cable:
[P/N: XRTKCAB-EZ]
3. Null Modem Adaptor (M-M)
4. Intuicom RTK Bridge–X Cellular/GPS antenna/cable:
[P/N: FIP4-MMDM-MM (magnetic mount)]

1.2.2 Other Equipment and Accessories

1. Raven Phoenix 300 with RTK unlocked
2. Raven cable p/n 1-115-0171-272
Version 1.0

Section 1: Installation Requirements

®
-X which in turn has been configured to connect to a
2 Intuicom, Inc.