Spare Parts/Service Information; Recommended Spare Parts; Replacement Parts And Service - 3M -Matic AccuGlide 3 200a Instructions And Parts List

Spare Parts/Service Information

Recommended Spare Parts

Listed are a set of spare parts that will periodically require replacement due to normal wear. These parts should
be ordered to keep the taping heads in production:
AccuGlide™ 3 Upper Taping Head - 2 inch
Qty. Ref. No.
4 10925-22
1 10919-10
1 10921-2
2 10921-12
1 -
AccuGlide™ 3 Lower Taping Head - 2 inch
Qty. Ref. No.
1 10921-2
2 10921-12
4 10924-22
1 10920-10
1 -
In addition to the above set of spare parts supplied with the taping head, it is suggested that the following spare
parts be maintained which will require replacement under normal wear of the taping head.
Qty. Ref. No.
1 10922-15
1 10919/10389-5
1 10921-18

Replacement Parts and Service

Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information".
AccuGlide 3 Taping Head - 2"
Part Number
78-8076-4500-3
78-8137-3311-6
78-8017-9173-8
78-8052-6602-6
78-8076-4726-4
Part Number
78-8017-9173-8
78-8052-6602-6
78-8076-4500-3
78-8137-3312-4
78-8076-4726-4
Part Number
78-8057-6179-4
78-8057-6178-6
78-8113-7030-9
Description
Stud – Mounting
Spring – Upper Extension
Blade – 65mm/2.56 Inch
Spring – Cutter
Tool – Tape Threading
Description
Blade – 65mm/2.56 Inch
Spring – Cutter
Stud – Mounting
Spring – Lower Extension
Tool – Tape Threading
Description
Roller – Applying
Roller – Buffi ng
Spring – Torsion
19
2009 February