Keysight N5222-60118 Installation Note page 37

Installation Procedure for the Upgrade
Step 32. Enable Options 417
Procedure Requirements
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must be running.
— Refer to the license message you received from Keysight: Verify that the
— Obtain your license key file(s) for installation of this upgrade by following
— A keyboard and mouse must be connected to the network analyzer.
Option Enable Procedure
1. Locate the email(s) from Keysight which contain license file attachments.
2. Copy the license file(s) from the email(s) to the root d irectory of the USB
3. Insert the USB flash drive into the PNA's USB drive slot.
4. The instrument automatically reads the license file(s) from the USB flash
5. Wait >1 minute for your Option to be installed.
6. The PNA application automatically restarts after the option installation has
Installation Note N5222-90118
For this step, you will need a USB flash drive.
analyzer's model and serial numbers match those on the license message
you received from Keysight.
the instructions on the supplied Software Entitlement Certificate.
These emails are a result of
Information" on page
A single license file may contain licenses for more than one instrument.
flash drive. More than one license file may be copied to the USB flash
drive.
drive, validates the file(s), and installs the option(s). Generally, warnings
or error messages may be ignored.
The instrument will not prompt you when the upgrade has been
completed.
been completed.
"Step 1. Obtain a Keyword and Verify the
13.
37