Table of Contents
Advertisement
Installation Procedure for the Upgrade
Step 14. Assemble the A29 - A32 Test Port Coupler Assemblies
1. Remove the A29 test port 1 coupler and A32 test port 2 coupler from the
2. Using pliers, remove the adhesive bumper on the A29 test port 1 coupler
3. Follow the two instructions shown in
Figure 7
A29 - A32 Test Port Coupler Assembly
22
PNA. For instructions, click the Chapter 7 bookmark, "Removing and
Replacing the A29 - A32 Test Port Couplers" in the PDF Service Guide
and on the A32 test port 2 coupler.
Table 1 on page 8
of this document.
Figure
7. New parts are listed in
Installation Note N5222-90118
2
.
Advertisement
Table of Contents
