Table of Contents
Advertisement
Installation Procedure for the Upgrade
Figure 13
Information to Secure W35 and W36
— W35 (reuse) (N5222-20033) A33 reference mixer switch to front-panel REF
— W17 (N5222-20023) A26 port 3 receiver coupler to front-panel REF 3
— W75 (N5222-20002) A26 port 3 receiver coupler to A35 port 3 source
— W90 (N5222-20006) A43 port 3 receiver attenuator to A24 mixer brick (C)
— W8 (N5222-20042) W7 to A27 port 4 receiver coupler
— W6 (N5222-20041) W5 to A26 port 3 receiver coupler
— W49 (N5222-20024) REF 3 RCVR R3 IN to A24 mixer brick (R3)
30
1 SOURCE OUT
* Refer to the note shown in
(part number N5222-20033).
SOURCE OUT
attenuator
* As shown in
Figure
14, install two cable clamps (part number 1400-1334)
to secure W49 (part number N5222-20024).
Figure 13
for information on installing W35
Installation Note N5222-90118
Advertisement
Table of Contents
