Advertisement
BT7323
PARTS LIST & INSTALLATION INSTRUCTIONS
PARTS LIST
No
PART NAME
QTY
1
CABLE MANAGER BASE
2
2
SPACER RING
1
3
M10 X 76 ALLEN SCREW
1
4
6MM ALLEN KEY (FOR PART 3)
1
1
1
3
PLEASE KEEP THIS PARTS LIST FOR
FUTURE REFERENCE
READ FIRST
- Select configuration A,
B or C to suit the
requirements of the
installation.
- For configurations A &
B, the load must be on
the opposite side to the
cable management hole
as shown in FIG 1.
CABLE MANAGEMENT
HOLE
- For a tidy installation,
cables can be passed
down through the pole,
through the cable
manager base and desk
cable management hole.
2
B.
Used with desk cable management
hole
BT7325 or
1
BT7326
Pole (sold
separately)
4
DESK
1
3
A.
Used with desk cable management hole with
FIG 1.
insert
Example
installation
BT7325 or
BT7326
LOAD THIS SIDE
Pole (sold
separately)
DESK
C.
Used with drilled hole in desk
Cable managment
BT7325 or
hole
BT7326
Pole (sold
separately)
Use the M10 Allen screw
(part 3) to attach the
pole (sold separately) to
the desk through the
existing cable
managment hole.
Tighten screw from the
underside of the desk
using the 6mm Allen key
(part 4) .
No holes need to be
drilled by the installer for
this configuration.
1
Cable managment hole
with insert in desk
2
Fit the rubber spacer over the cable
management hole with insert. Ensure the
sticky side faces upwards. Stick the cable
manager base (part 1) on top of the spacer.
Use the M10 Allen screw (part 3) to attach
the pole (sold separately) to the desk through
1
the existing cable managment hole. Tighten
screw from the underside of the desk using
the 6mm Allen key (part 4) .
3
No holes need to be drilled by the installer for
this configuration.
1
Desk with 12mm
drilled hole
Drill a 12mm hole in the
DESK
desk at the desired
locaction. Use the M10
X 76 Allen screw (part
3) to attach the pole
1
(sold separately) to the
desk. Tighten screw
from the underside of
3
desk using the 6mm
Allen key (part 4) .
v.0109 OR1BX
PAGE 2 / 2
Advertisement
