Christie CP2220 Instruction Sheet page 4

Widen a Cathode Clamp Instruction Sheet
3. Insert and tighten the cathode screw into the opposite side of the cathode clamp.
4. Insert the flat portion of a large flathead screwdriver into the cathode clamp so it fits behind the
cathode screw.
5. Hold the screwdriver in position and tighten the cathode screw against the screwdriver with a
1/8" Allen key until the cathode clamp widens enough to allow the installation of a CDXL lamp.
6. Remove the cathode screw and reinstall it in its original location.
4 Widen a Cathode Clamp Instruction Sheet
020-101328-01 Rev. 1 (01-2014)