Protecting The Environment; Maintenance - Black+Decker BDEL501 Manual

ENGLISH
motor is running.
Slacken the side handle (6) by turning the grip counter-

clockwise.
Set the depth stop (7) to the desired position. The maxi-

mum drilling depth is equal to the distance between the tip
of the drill bit and the front end of the depth stop.
Tighten the side handle by turning the grip clockwise.

Switching on and off
To switch the tool on, press the variable speed switch (1).

The tool speed depends on how far you press the switch.
As a general rule, use low speeds for large diameter drill

bits and high speeds for smaller diameter drill bits.
For continuous operation, press the lock-on button (2) and

release the variable speed switch. This option is available
only in forward (clockwise) rotation.
To switch the tool off, release the variable speed switch.

To switch the tool off when in continuous operation, press
the variable speed switch once more and release it.
Accessories
The performance of your tool depends on the accessory used.
Black & Decker accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By us-ing these accessories you will get the very best
from your tool.

Maintenance

Your Black & Decker corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.

Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then

switch off.
Unplug the charger before cleaning it. Your charger does

not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/

charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust

8
(Original instructions)

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environ-
mental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Service Information
Black & Decker offers a full network of company-owned and
authorized service locations throughout Asia. All Black &
Decker Service Centers are staffed with trained personnel
service.Whether you need technical advice, repair, or genuine
factory replacement parts, contact the Black & Decker location
nearest to you.
Notes
• Black & Decker's policy is one of continuous improvement
to our products and, as such, we reserve the right to
• Standard equipment and accessories may vary by
country.
• Complete product range may not be available in all
countries.
• Contact your local Black & Decker dealers for range
availability.
Black & Decker Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD, United Kingdom
23/07/2012