Table of Contents
Advertisement
FIGURE 10. Rotary Sensor Installation Location on Center Rack
3. Using a provided 2-9/16" x 3-1/2" U-bolt, loosely install the rotary sensor strap bracket to the upper horizontal
tube that pivots (see Figure 11 on page 31).
FIGURE 11. Rotary Strap and Sensor Bracket Installation
Rotary Strap
Rod End
4. On the center frame, use two provided 3-1/16" x 4" U-bolts to loosely install the rotary sensor assembly labeled
"Center Rack 90/100 FT" to the lower horizontal tube positioned between the center rack and the center frame.
The sensor mounts on the right side of the center.
5. Install the rotary sensor link and rod end to the rotary sensor strap and secure with an M6 nylock nut.
6. Adjust the rotary sensor bracket and the rotary sensor strap until the rotary sensor arm is roughly in a vertical
orientation.
7. Tighten all hardware.
016-0236-001 Rev. C
SENSOR INSTALLATION
Upper
Horizontal Tube
Jam Nuts
Rotary Sensor
Arm
Rotary Sensor
Bracket
31
Advertisement
Table of Contents
