Table of Contents
Advertisement
C
4
HAPTER
2. Install the radar sensors (P/N 063-0173-962) on the sensor mounting brackets (P/N 107-0235-001) using two 1/
4"-20 x 5/8" Phillips pan head bolts (P/N 311-0050-255) and two 1/4"-20 nylon locking nuts per sensor (P/N
312-4000-164).
NOTE:
Install two of the sensors in one orientation and three in the other orientation on the bracket so, when
installed, the sensor connection is facing towards the center of the machine.
FIGURE 1. Sensor Installed on Mounting Bracket
3. Mount the boom sensor assemblies on the back of the outer boom sections using 2-1/16" W x 3" L x 3/8"
thread U-bolts and 3/8"-16 flanged lock nuts.
FIGURE 2. Boom Sensor Installed
26
AutoBoom® XRT Installation Manual for Case IH Patriot 3XX0/44X0 and Trident 5550 (MY 2017-19)
Sensor Mounted Near End of Boom
Advertisement
Table of Contents
