Table of Contents
Advertisement
FIGURE 2. Coil Removed from the AutoBoom Valve
3. Use an Allen wrench to remove the plugs from Ports 3A and 3B.
FIGURE 3. Port Plugs Removed from the AutoBoom Valve
4. Remove the orifice fittings from Ports 3A and 3B.
FIGURE 4. Orifice Fitting Removed from the AutoBoom Valve
NOTE:
Tip the AutoBoom valve on its side and use the Allen wrench to remove the orifice from the cavity,
taking care not to let the fitting fall into the valve.
016-0236-001 Rev. C
HYDRAULIC SYSTEM INSTALLATION
Orifice Fitting
Removed - Keep for
Future Use
13
Advertisement
Table of Contents
