Mounting The Breakout Box - American Dynamics Illustra 625 PTZ Quick Reference Manual

English Illustra 625 PTZ Breakout Box

Mounting the Breakout Box

The breakout box can be mounted either indoors or outdoors to any suitable vertical flat surface.
Step Action
Remove the cover from the box.
1
Using the breakout box as a template, mark locations for the four mounting screws. As
2
seen in the Figure 1.
Drill holes. If in concrete, insert anchors.
3
Place the breakout box in it's mounting position. Then insert a 25mm (1 inch) #8 mounting
4
screw (not supplied) into each hold in the four corners of the breakout box and tighten to
secure.
1-2
Figure 1
- End -
Quick Reference Guide