Page 5
A18 is tied to GND through R315 to ensure consistent operation. PK7 is connected to A18 through R314. The user has the option to control A18 manually in ATMEL Norway firmware to acces the entire RAM. Vestre Rosten 79 N-7075 TILLER...
Page 8
This supply is connected to either VCC_EXT_P5V0, VCC_EDBG_USB_P5V0 or VCC_TARGET_USB_P5V0, based on the availability and priority ot these supplies. VCC_P3V3 Regulated 3.3V from VCC_P5V0 VCC_TARGET Target supply voltage (target MCU and peripherals) ATMEL Norway Vestre Rosten 79 N-7075 TILLER NORWAY Date: 28.09.2015...
Page 18
Label PCBA ACT Logimark AS 505462 PCBA identification label PP Top White Gloss Fitted PCB1 NCAB XMEGA A1U Xplained PRO PCB, 4 layer, size 60mm x 100mm Fitted Q100, Q101 IRLML6402PBF International Rectifier IRLML6402PBF P-ch. MOSFET. -30V, -3.7A continuous,RDS(ON)=0.05Ohm@VGS=-4,5V, RDS(ON)=0.08Ohm@VGS=-2.5V...
Need help?
Do you have a question about the Xmega A1U Xplained Pro and is the answer not in the manual?
Questions and answers