BEA LZR-FLATSCAN REV-LZ User Manual page 4

1
MOUNTING ON DOOR
1
Slide the base off the sensor module.
When mounting the base, make sure the sensor will not hinder the door movement.
If the sensor isn't correctly positioned, it could be crushed during the opening of the door.
3
Using a pencil, mark the position of the holes
to drill into the door frame. You can also use the inner
surface of the base to fasten the screws.
4
2
Take the base and put it on the door frame.
The positioning aids help you to align the base correctly.
4
Remove the base and pre-drill the holes where marked.