Advertisement
VL800 EVENTWASH
MENU CONTROLS
The menu system is controlled by [MENU], [ENTER] and two arrow (
LCD DISPLAY AND MENU OPERATION
The LCD Display Menu system consists of several categories. Use the Menu Buttons to access and make changes
to the menu items. When the desired menu item is reached, press the desired Menu Button to display the menu
options and to navigate and confi gure the menu options as required.
To navigate and access menu setting/selections:
Step 1.
Make sure unit is powered and turned on.
Step 2.
Press [MENU] to access menu categories.
Step 3.
Use two Arrow (
Step 4.
Once menu item is reached, press [ENTER] to access the menu item parameters.
Step 5.
Make changes to parameters as desired.
Step 6.
Press [ENTER] button to accept changes.
To set, edit, and save a DMX address:
Step 1.
Press [MENU].
Step 2.
Press [Up] / [Down] (
Step 3.
Use [Up] / [Down] (
Step 4.
Once all digits are set in DMX address, press [Enter] to set.
Step 5.
DMX displays and is saved.
STATUS BAR
The Status Bar is present at all times and displays luminaire operational information
of the luminaire. The Status Bar contains the following information:
• LED – indicates current LED state - ON or OFF.
• MODE – indicates current mode, standard, studio and whisper mode.
• ERR – Displays a number indicating the total amount of current errors
can cycle through short text descriptions of each error. Example: "Fan" or
"LED". When errors are present, messages will appear in red text. When no errors are present, NO will
display.
• MAP – indicates 16 bits or 8 bits.
• ADDR – Displays the current DMX address for the fi xture. NOTE, when the fi xture does not detect a
DMX input signal, the DMX address text will display in red text.
▲▼
) buttons to navigate through the various options and settings.
▲▼
) arrows until Address (DMX Address) appears. Press [Enter].
▲▼
) arrow buttons to select the desired digit.
5
▲▼
) buttons.
[ENTER] Button
To select or change a setting
or data value
Arrow Keys (Up/Down)
Menu navigation / data selection
[MENU] Button
Used to access main menu
parameters
LCD Display
Displays all data and luminaire
settings
QUICK START GUIDE
Advertisement
