Table of Contents
Advertisement
MT2834BLR Owner's Manual
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
38
&Pn
n = 0 or 1
&P0
&P0 selects 60-40 pulse ratio.
&P1 selects 67-33 pulse ratio.
Qn
n = 0, 1 or 2
Q0
Q0 selects Result Codes displayed.
Q1 selects Result Codes suppressed (quiet).
Q2 selects Dumb Answer Mode.
&Qn
n = 0 or 1
&Q0
&Q0 selects Multi-Tech command set.
&Q1 selects AT command set.
Rn
n = 0 or 1
R0
R0 means modem will not reverse modes.
R1 means modem will reverse modes.
&Rn
n = 0, 1 or 2
&R1
&R0 lets Clear to Send act normally.
&R1 forces Clear to Send on.
&R2 drops for 1 second on disconnect.
$Rn
n = 0 or 1
$R0
$R0 selects disconnect after 12 retransmits.
$R1 selects do not disconnect after 12 retransmits.
&RFn
n = 0 or 1
&RF1
&RF0 selects CTS follows RTS.
&RF1 selects CTS to act independently
Sr=n
r = 0-11, 13, 15-17, 24-26, 29, 30, 32, 34, 36, 37, 48
n/a
Sets value of S-Register "r" to value of "n", where "n" is entered in
decimal format.
Advertisement
Table of Contents
