Titan HKE heavy duty Instruction Manual page 24

Combined strapping tool for steel strap
Table of Contents

Advertisement

Available languages

Available languages

If necessary, tighten the great strap
loop: The left hand pulls the strap loop,
the right hand grasps the lifting Rocker
520.
The right hand grasps the tension
lever 522 and moves it back and forth
to obtain the desired strap tension. At
the same time the left hand holds the
cutting lever 96.
After having reached the desired strap
tension bring tension lever 522
back into its initial position. The right
hand remains there and provides
support for the joining process. The
TITAN "No-seal" joint is formed by
pushing the cutting lever 96 forwards
rapidly with the left hand until it strikes
against the case; the steel strap is
simultaneously cut off directly behind
the joint.
Bring tension lever 522 back into its
initial position. Grasp and press
together rocker 520 with cutting lever
96. Withdraw the tool from the package
by a rotary movement to the right side.
HKE–heavy duty
24 / 47
H 223HD EU 25/08

Advertisement

Table of Contents
loading

Table of Contents