General Information; Information On Environmental Protection - Titan HKE heavy duty Instruction Manual

Combined strapping tool for steel strap

Table of Contents

Available languages

General information

These operating instructions are intended to simplify familiarisation with the strapping tool

and the possibilities of application for the intended purpose.

The operating instructions contain important information concerning the safe, proper

and efficient use of the strapping tool.

Following the instructions helps avoid risks, reduces repairs and downtimes and increases

reliability and life of the unit.

The operating instructions must always be available at the place of operation of the strapping

tool. They must be read and observed by persons concerned with work on the strapping tool.

This work specifically includes operation, refilling of operating material, fault elimination and

maintenance.

In addition to the operating instructions and the regulations for accident prevention effective

in the country of use and place of application, the recognised technical regulations for safety

and proper working must also be observed.

Explanatory notes on the warning and instruction symbols:

The contents of this document must not be duplicated, handed to third parties, published or saved in any form,

neither fully nor partly, without prior written permission by TITAN Umreifungstechnik GmbH & Co.KG.

HKE–heavy duty

CAUTION!

Used where there is danger to life and health.

WARNING!

Used for danger this can cause Material damage.

NOTE!

Used for general information and information which

if not followed can cause faults in the operating sequence.

This tool is manufactured without any physical or chemical

substances which could be dangerous to health. For disposal of all

the parts, the governmental instructions must be observed.

is a registered trademark of TITAN Umreifungstechnik GmbH & Co.KG.

H 223HD EU 25/08

17 / 47

Table of Contents

Table of Contents