Operating Instructions; Operating The Tool - Titan HKE heavy duty Instruction Manual

6.

Operating instructions

6.1. Operating the tool

Place TITAN steel strap from above
around the package.
Pull through the strap end until is in the
center of the package beneath the upper
run of strap and juts out approx. 15 cm.
With the left hand hold the upper and
lower run of the strap together. Both
straps must be placed exactly on top
of one another. Grip and press rocker
520 together with the cutting lever 96
with the right hand. Insert the steel strap
laterally until it strikes against the case
wall, ensuring that the lower run of strap
projects slightly out of the tool at the
front. The right hand now releases the
levers which have been pressed
together.
HKE–heavy duty
If the straps are not inserted correctly in
the tool, it is not possible to perform the
tensioning operation.
H 223HD EU 25/08
23 / 47