Installing
4.2 Technical data of the telescopic rails
CAUTION
The mounting screws of the telescopic rails may not protrude more than 5 mm into the
enclosure.
Note
For vertical operation, mount the device on a horizontal metal base and secure it against
tipping. The following decide bases are available from Rittal for this purpose:
Rittal Type TE 7000.620, Rittal Type VR 3861.580, Rittal Type DK 7063.710.
Please refer to the case manufacturer's instructions regarding device bases.
Risk of injury!
It is not permitted to mount the device only on the 19" brackets of the front panel.
4.2
Technical data of the telescopic rails
Ultimate load per pair
Full extraction length
Rail thickness
Mounting screws
The mounting screws of the telescopic rails may not protrude by more than 5 mm into the
enclosure.
18
CAUTION
At least 30 kg
At least 470 mm
Maximum 9.7 mm
M5 x 6 mm
Getting Started, 06/2009, A5E02411398-01
SIMATIC IPC547C