Technical Data Of The Telescopic Rails - Siemens SIMATIC IPC647C Getting Started

Installing

4.2 Technical data of the telescopic rails

You can mount the device as follows:
● Mounting on cabinet brackets
● Mounting on device bases
● Mounting on telescopic rails
4.2 Technical data of the telescopic rails
Ultimate load per pair
Full extraction length
Rail thickness
Mounting screws
20
When telescopic rails are used for mounting, the device can be withdrawn fully from the
cabinet or rack.
For more detailed information on telescopic rails, refer to the sections Technical data of
the telescopic rails (Page 20) and Dimensional drawing for the use of telescopic rails
(Page 36).
Figure 4-1 Position of the mounting holes
CAUTION
The mounting screws of the telescopic rails may not protrude more than 5 mm into the
enclosure.
CAUTION
Risk of injury!
It is not permitted to install the device only on the 19-inch brackets of the front panel.
①
At least 14 kg
At least 470 mm
Maximum 9.7 mm
M5 x 6 mm
Getting Started, 12/2010, A5E02669344-02
SIMATIC IPC647C