Introduction - Elcometer 223 Operating Instructions Manual

R
Thank you for your purchase of the Elcometer 223 Digital Surface Profile Gauge. Welcome to Elcometer.
Elcometer are world leaders in the design, manufacture and supply of inspection equipment for coatings
and concrete. Our products cover all aspects of coating inspection, from development through application
to post application inspection.
The Elcometer 223 Digital Surface Profile Gauge is a world beating product. With the purchase of this
product you now have access to the worldwide service and support network of Elcometer. For more
information visit our website at www.elcometer.com

1 INTRODUCTION

The Elcometer 223 Digital Surface Profile Gauge allows accurate measurement of the peak-to-valley height
of the surface profile of blast cleaned surfaces.
To maximise the benefits of your new Elcometer 223 Digital Surface Profile Gauge please take some
time to read these Operating Instructions. Do not hesitate to contact Elcometer or your Elcometer
supplier if you have any questions.
1.1 STANDARDS
Your Elcometer 223 Digital Surface Profile Gauge can be used in accordance with the following National
and International Standards: ASTM D 4417-B, IMO MSC.215(82), SANS 5772, US Navy NSI 009-32, US
Navy PPI 63101-000.
2