Daikin EEV Series Installation Instructions Manual page 5

Sensor wires
2
Wire ti e
Insulation
1
Wire ti e
Insulation
(2) Connect the junction connectors
Junction wires
and slide the insulation over it.
Secure the insulation on the
(1) Insert the junction-
junction using two wire ties.
connectors into the
insulation
WIRE TIE LOCATION TO BE REMOVED
Screw
(Side view)
Detail D
.59
(15 mm )
Screw
1.57
(40 mm )
2.36
(60 mm )
.59
15 mm )
(Side view)
Detail C
(3) Secure the insulated connectors to
the corner using two screws and the
mounting wire ties provided.
WIRE TIE LOCATION TO BE SECURED
Figure 2-1
Screw
mount
4
wire tie
(Front view)
Screw
mount
3
wire tie
*Do not get the
trap to touch
the coil tubing
(Front view)
Figure 2-2
5
D
Screw
mount
5
wire tie
C
Center
Support
Corner
Post
Bundle excess
wire and secure
it to the corner
post using screw mount
wire ties