Dashboard (Start Sreenm) - Adesys Octalarm-Touch Manual

Adesys B.V. | Wateringen
7. optional: Activate the Octalarm Connect service.
If this fails (for example if the message 'Portal not reachable', 'payment failed' etc. is shown), use
portal.octalarm.com
The initial setup is now completed. Pressing 'Ready' activates the Octalarm-Touch.
4.2.

Dashboard (start sreenm)

Interface status
Active (white)
In use (green)
Malfunction (red)
Out of order (gray)
Alarm status
Idle (green)
Active (red)
Disabled (gray)
Types of messages on the dashboard:
1. Alarm message
Timetable type
day
night
weekend
Input number
and name
When you press on this message, there are two options:
• Buzzer off only:
The buzzer is muted. When the Octalarm-Touch
does not record any activity for 10 minutes, the
buzzer will turn on again.
• Accept all alarms:
If you accept the alarm, the Octalarm-Touch
will not initiate a new alert for this alarm, until
the waiting time between repeats has expired.
More information about the waiting time can be
found in chapter "6.1. Configuring inputs".
Manual Octalarm-Touch | Back to
Chapter 7.1.2 contains more information on activating Octalarm Connect.
Contacts Alarms
Call lists
(see C6)
(see C5)
Date of occurance of alarm
Action
Busy calling...
Accepted
Waiting for...
index
Settings Log
(see C7) (see C8)
http://
Present time
Current schedule
Log out
Linked call list
Repeat
Number of repetitions /
/ Maximum number of repetitions
Page 7