System Properties Further Explained; Screen; Power; Batterij - Adesys Octalarm-Touch Manual

Adesys B.V. | Wateringen
3.

System properties further explained

3.1.

Screen

The screen is made of glass with a touchscreen in the middle as seen in the picture above. Do not use
hard objects on the touchscreen as these will leave scratch marks and potentially couse it to become
inoperable.
To use RFID place an RFID tag within 10 mm of the RFID reader location.
3.2.

Power

3.3.

Batterij

Battery compartiment description
1 Velco fastener
2 Battery connector location
3 Battery label
Manual Octalarm-Touch | Back to
Battery label (Europe)
index
Screen pictogram description
1 RFID reader location
2 Brand logo
By placing the power cable in an S-shape around the
pull protector the power connection is protected
against unintentional removal. When replacing or
using a power supply cord not included by Adésys
the power supply cord must be according to IEC
60227-1.
Place the battery on the battery flat and set it tightly
with Velcro. Then close the connector.
Attention:
when using the wrong type of battery,
there is the possibility that this will cause damage to
it device or battery.
Page 5