Link Or Create Call List (Right Side); Rotation Of Call Interfaces; Settings; General - Adesys Octalarm-Touch Manual

Adesys B.V. | Wateringen
Waiting time between repetitions
Between the number of repetitions the Octalarm-Touch waits the number of minutes you enter here.
Buzzer
By default, the buzzer is enabled. If you uncheck the 'On upon alarm' field, the buzzer (and any external
buzzer) will no longer be used for this alarm.

6.1.2. Link or create call list (right side)

• Select a call list by pressing the double arrows.
• Select the desired call list, or select 'New...'.
• After selecting the desired call list, select 'Save'
• After selecting 'New...' Select 'Create'
• See chapter "5.2. Call lists" from the bullet 'Enter a clear name'.
• Press 'Save' at the bottom.
6.2.

Rotation of call interfaces

7.

Settings

7.1.

General

7.1.1. System information

Under System information, you can find all
information for the Octalarm-Touch you may need
for maintenance of the Octalarm-Touch or when
contacting the help desk.
For the help desk you need the serial number and
the pairing code. The pairing code is a security code
that changes. There is therefore no point in making a
note of it.

7.1.2. Octalarm Connect

If you did not select Octalarm Connect during the onboarding, you can still activate it via the alarm device
or via the portal.
Activating Octalarm Connect
1. via the alarm dialler
• Go to 'settings'.
• In the navigation, scroll to 'Octalarm Connect'.
• Press 'Add'.
• Enter the customer's Email address.
The customer will now receive an activation email. Ask the customer to activate their subscription via the activation email.
• Enter the customer's company details and VAT number.
• Pay via credit card.
The SIM card and VoIP calling are now active.
Manual Octalarm-Touch | Back to
The Octalarm-Touch automatically rotates its interfaces when sending
out alarms. This allows the system to check if all interaces are still
working.
For example: After starting, when there is an alarm, the system
starts dialling out via GSM. After this call has been made, the system
automatically changes the order and for the next alarm the system will
use another communication interface.
index Page 11