Advertisement
A
bout the Ab/Back Station
Congratulations on your new purchase of the Ab/Back Station. We
hope you are completely satisfi ed with this product and wish you
many years of enjoyment.
T
uff Stuff Equipment
This Tuffstuff product has been built to precise quality standards
and has been carefully packaged to ensure that damage will
not occur during shipment. The TuffStuff Warranty and signature
indicating fi nal inspection has been conducted by our line foreman,
is an expression of our confi dence in the completeness, the
materials, and workmanship of this product.
W
arranty
SEE A COPY OF WARRANTY ON BACK PAGE.
R
egistration Card
To avoid unnecessary delays in warranty service and to insure that
a permanent record of your purchase is on fi le with our factory,
be sure to complete the warranty registration card and send it to
TuffStuff Fitness Equipment today.
S
pecifi cations
1. Maximum Wt. Capacity
2. Total Machine Weight
Step 1
Side Frame Assembly
A
Assemble the Adjustable Pulley Bracket (#3) to the Weight Stack Frame using hardware shown.
B
Attach a Pulley 3/8 X 4 1/2 (#22) to the Weight Stack Frame using hardware shown.
C
Affi x the Side Frame (#16) to the Weight Stack Frame using hardware shown.
Item #
3
ADJUSTABLE PULLEY BRACKET
16
SIDE FRAME
22
PULLEY 3/8" X 4 1/2"
33
FINISHED HEX NUT B/O 1/2-13
36
FLAT WASHER SAE B/O 3/8"
1
- 200 lbs.
- 185 lbs.
Description
P
rior to the Assembly of the Ab/Back Station
1. We advise you to consult your local Tuff Stuff retailer if you
should have a question or problem regarding the proper
assembly of this unit.
2. Neatly organize and identify all parts according to the Parts List
and the Exploded View Diagram.
T
ool Requirements
1. One 7/8" combination wrench
2. One 3/4" combination wrench
3. One 9/16" combination wrench
4. One 1/2" combination wrench
5. One ratchet
6. One 9/16" socket
7. One rubber mallet
8. Windex or household glass cleaner
9. Measuring tape
10. Utility knife
Note: Due to continuing product improvements, specifi cations and designs are subject to change
without notice.
Assembly List
Qty.
Item #
1
38
HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 1 3/4
1
40
HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 3 1/4
2
45
NYLON INSERT JAM LOCK NUT B/O 3/8-16
2
46
NYLON INSERT LOCK NUT B/O 3/8-16
8
65
SPLIT LOCK WASHER Z/P 1/2"
Description
Ab/Back Station
Qty.
2
2
2
2
2
Advertisement
