How Bebècare Functions; Using The Bebècare App On Multiple Devices - Chicco Oasys 0+ UP BebeCare Manual

d) Associate the car seat with the family
account
To associate the car seat with BebèCare to
the family account , proceed with scanning
the QR code on the car seat. The QR code is
printed on the type approval label and can
only be seen after removing the silver film.
By scanning the QRCode, the application
recognises the car seat model, then simply
turn on Bluetooth®, apply pressure on the
car seat and move the smartphone near the
car seat to be associated and connect the
car seat with the family account.
Up to a maximum of 3 car seats with Bebè-
Care can be associated with the same family
account.
The specific car seat can be associated with
ONLY one family account.
IMPORTANT: If the QR code is already visible
or partially visible, contact Customer Service.
IMPORTANT: When scanning the QR code,
an internet connection must be available
(mobile data or WiFi network).
e) Check the correct operation of the
sensors
Periodically perform pressure tests on the car
seat (safety, during the journey on they may
harm) to check that BebèCare is functioning.
f) Enter the information about the baby
After associating the car seat with the family
account, enter the name and date of birth of
the child. You can also enter a photograph.
Artsana does not guarantee equipment
operation in conditions other than those
indicated above, or in the case of improper
use (including, but not limited to, use with
minors who are not correctly secured to the
car seat, if used with animals, etc.).
3.2 HOW BEBÈCARE FUNCTIONS
The system is activated/connected after a
few seconds from the moment the baby
is placed in the car seat and signals the
presence of the baby in the car seat via the
APP. The activation/connection time varies
based on the specific characteristics of the
smartphone; in some cases, a few dozen
seconds may be necessary.
The alarm system is activated the moment
that the smartphone that is connected to
the car seat moves away from the car in
which the car seat is installed with the baby
in the car.
BebèCare has two alarm levels:
1. First level alarm: if the smartphone moves
away from the car in which the car seat
is installed with the baby in the car, an
acoustic and visual alarm will appear on
the smartphone that can be silenced with-
in 40 seconds. If the smartphone moves
towards close to the car seat, this will not
stop the alarm, and it will be necessary
to interact with the APP by pressing the
"STOP" button.
2. Second level alarm: this is activated the
moment in which the first level alarm was
not silenced within the time window pro-
vided for the first level alarm, and sends
an SMS to all the predefined emergency
numbers with the information needed
for geolocating the area where the baby
is located.
If there is no signal, BebèCare will correctly
activate the first level alarm, however it is
not able to send the SMS to the emergency
numbers (second level alarm).
The cost of the SMS is always charged to
the user according to your phone rate plan.
3.3 USING THE BEBÈCARE APP ON
MULTIPLE DEVICES
After registering the family account and
associating the car seat with BebèCare us-
ing the smartphone by scanning the QR
code, it is possible to use BebèCare also with
other smartphones that have the BebèCare
APP installed. It is possible to use the same
family account with an unlimited number
of devices that have previously installed the
BebèCare APP.
The settings predefined using the first
smartphone (emergency numbers, asso-
ciation of the car seat and the child's data)
will be automatically available also on the
other smartphones with the BebèCare APP
and that are using the same family account.
IMPORTANT: if the family password is changed,
the new password must be shared with all
the users who use the same family account.
IMPORTANT: if there are two smartphones
in the same car that were previously as-
25