How To Activate Bebècare - Chicco Oasys 0+ UP BebeCare Manual

• The correct storage of the car seat (apart of
daily use in the car) is important to main-
tain the operation of BebèCare without
any changes and must respect the limits
regarding temperature (between -20°C and
+60° C) and humidity (< 95%).
• The use of any unapproved accessory does
not guarantee the correct operation of
BebèCare.
• The smartphone must be turned on and
have a sufficient battery charge for the
period of use when paired with BebèCare.
• During the first installation and each time
the family account is entered, an internet
connection must be available (mobile data
or WiFi network).
IMPORTANT:
• BebèCare only works together with a
smartphone that has the BebèCare APP
installed.
• If the smartphone is turned off, the Bebè-
Care system will not work.
• If the Bluetooth® is damaged, the BebèCare
system will not work.
• If airplane mode is activated, the BebèCare
system will not work.
• The BebèCare APP may only be download-
ed from official stores.
• If there is no signal, BebèCare will correctly
activate the first level alarm, however it is
not able to send the SMS to the emergency
numbers (second level alarm).
• BebèCare does not interfere with the nor-
mal operation of the Bluetooth® system
that may be present in the car.
WARNING:
• Check to perform each time BebèCare
is used:
• Check that is functioning correctly as de-
scribed in paragraph 3.1 How to activate
BebèCare point d).
• The smartphone must be turned on and
have a sufficient battery charge for the
period of use when paired with BebèCare.
• Bluetooth® must be active.
• "Airplane" mode must be deactivated.
• The smartphone SIM must have enough
credit.
• GPS must always be active.
• If two or more smartphones are used that
have the BebèCare APP installed, it is nec-
essary to identify which one is effectively
connected to the car seat and therefore
must never be abandoned.
3.1 HOW TO ACTIVATE BEBÈCARE
a) Download the BebèCare APP
The BebèCare APP must be downloaded.
When accessing for the first time, the APP
will provide all the instructions to follow
to register the account and use BebèCare.
b) Create the family account
A "family account" must be created with a
single password. This account will be the
only one that can be used by those who
use that specific car seat with BebèCare.
The password is shared with all users who
interact with the car seat on which BebèCare
is installed.
IMPORTANT: When creating the family
account, an internet connection must be
available (mobile data or WiFi network).
IMPORTANT: If the family password is
changed, the new password must be shared
with all the users who use the same family
account.
c) Enter the emergency numbers
When accessing for the first time, it is nec-
essary to enter the emergency numbers to
which an alarm SMS will be sent (second
level - see paragraph 3.2 How BebèCare
functions) containing the data needed
to geolocate the area where the baby is
located.
A minimum of 1 to a maximum of 5 emer-
gency numbers must be entered.
The emergency numbers must be selected
from the contacts in your smartphone and
can be added, deleted and/or replaced in
the future.
IMPORTANT: During this operation, an inter-
net connection must be available (mobile
data or WiFi network).
IMPORTANT: The emergency numbers must
be mobile phone numbers and not landline
or national emergency numbers.
IMPORTANT: Always check that the emer-
gency numbers are correct and are func-
tioning after entering them.
24