Service:bist:peak[1]:Linearity - Keysight Technologies U2040 X-Series Programming Manual

SERVice:BIST:PEAK[1]:LINearity

Syntax
SERVice:BIST:PEAK[1]:LINearity
Description
This command initiates the PEAK linearity test.
Device Clear can be used to abort the PEAK linearity test. The "Self-Test Started" operation
NOTE
status bit can be used to check the status of the test.
Example
SERV:BIST:PEAK:LIN
[1] Applicable for U2042XA/U2044XA/U2049XA only.
Keysight U2040 X-Series Programming Guide
[1]
Initiates the PEAK linearity test.
SERVice Subsystem 17
279