Memory:catalog:table - Keysight Technologies U2040 X-Series Programming Manual

MEMory:CATalog:TABLe?

Syntax
MEMory:CATalog:TABLe?
Description
This query is used to list the stored frequency-dependent offset, gamma, and
S-parameter tables.
The U2040 X-Series returns the data in the form of two numeric parameters and as many
strings as there are stored tables.
<numeric_value>,<numeric_value>{,<string>}
– The first numeric parameter indicates the amount of memory, in bytes, used for the
storage of tables.
– The second parameter indicates the memory, in bytes, available for the storage of
tables.
– Each string parameter returned indicates the name, type, and size of a stored table:
<string>,<type>,<size>
– <string> indicates the name of the table.
– <type> indicates TABL for a table.
– <size> indicates the size of the table in bytes.
For example, a sample response may look like:
0,933460,"CUSTOM_A,TABL,0","CUSTOM_B,TABL,0","CUSTOM_C,TABL,0","C
USTOM_D,TABL,0","CUSTOM_E,TABL,0","CUSTOM_F,TABL,0","CUSTOM_G,TAB
L,0","CUSTOM_H,TABL,0","CUSTOM_I,TABL,0","CUSTOM_J,TABL,0","Gamma
1,TABL,0","Gamma2,TABL,0","Gamma3,TABL,0","Gamma4,TABL,0","Gamma5
,TABL,0","Gamma6,TABL,0","Gamma7,TABL,0","Gamma8,TABL,0","Gamma9,
TABL,0","Gamma10,TABL,0","SParam1,TABL,0","SParam2,TABL,0","SPara
m3,TABL,0","SParam4,TABL,0","SParam5,TABL,0","SParam6,TABL,0","SP
aram7,TABL,0","SParam8,TABL,0","SParam9,TABL,0","SParam10,TABL,0"
Example
MEM:CAT:TABL?
Keysight U2040 X-Series Programming Guide
Queries the list of stored tables.
MEMory Subsystem 13
167