Installation; Mounting - ProLights DISPLAYCOBTRWDWW User Manual

Diffused light projector

Table of Contents

Available languages

diSpLAYcoBTRWdWW

- 2 - INSTALLATION

DISPLAYCOBTRWDWW is designed for applications in exhibition areas, commercial spaces, museums, res-

taurant, churches, and any other installation where size is an important factor. For fixing, stable mounting

clips are required. The mounting place must be of sufficient stability and be able to support a weight of

10 times of the unit's weight.

When carrying out any installation, always comply scrupulously with all the regulations (particularly re-

garding safety) currently in force in the country in which the fixture's being used.

• Install the projector at a suitable location.

• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.

• Adjust the projector and use the knobs.

NOTE - For the installation of the DISPLAYCOBTRWDWW make sure that the ridge of the adaptor is in with

the groove of the track. Turn knobs 90° to connect the adaptor to the circuit. Please see the below instruc-

tions.

Fig.3

Table of Contents

Table of Contents