Technical Specifications - SPIT 250E SD Operator's Manual And Maintenance Instructions

TECHNICAL SPECIFICATIONS

Power
Voltage
Frequency
Current
No load speed
Full load speed
Maximum drill potential
Connection
Safety mechanism
Thermal safety mechanism
Protection against excess pressure
Insulation
Cable with PRCD (IP55)
Weight
Measurements
Hand grip
Noise and vibration
The measurements recorded conform to the European standard 50144:
Noise (Lpa) 97 dB
Noise (Lwa) 92 dB
Wear ear-protectors!!
Measurement when running freely < 2,3 m/s²
We declare in sole responsibility that the product type Spit SD 250E referred to in this
declaration conforms to the following standards and further normative documents.
We declare under our sole responsibility that this product is in conformity with the
following standards or standardization documents:
EN 61000-3-2 / EN 61000-3-3
EN 50082-1
EN 55014-1/A1 / EN 55014-1/A2 / EN 55014-2
EN 55104
89/336/EEG
Paul van Beek
General Manager
1
Confirmation declaration
ITW Heger
Industriepark
Cardijnlaan 3
BE-8600 Diksmuide
Belgium
2500 W
230 V
40-60 Hz
11,5 A
500 – 1100 min
-1
360 – 850 min
-1
Ø 250 mm
½" and 1 ¼"
torque limiter
yes
through an electronic system
class I earthed
3 m
10,4 kg
520 x 155 x 153 mm
yes
Ruben Bernaert
Product Manager