Dispensing Of Beverages - Chocolate / Solubles; Dispensing Of Beverages - Hot Water - LaCimbali Q10 New Touch Use And Installation

8.3 Dispensing of beverages - Chocolate / Solubles

Preliminary operations
Place the cup under dispenser (1) of the required group.
Soluble beverage dispenser
Press the chocolate (or other soluble beverage) dispensing
button corresponding to the required dose. The selected key
remains pressed and the beverage is dispensed.
Dispensing will stop automatically.
Beverage dispensing can be stopped before the set time by
pressing the same key again.
Mixed Soluble dispenser
1
Combined dispensing that can include coffee, milk and solubles
40
beverages.
Selection customization, with the sequence and duration
of the dispensing cycles for each beverage, is done by the
installer.
Insert the tube (40) into the milk container.
Press the mixed soluble dispensing button corresponding to
the required dose. The selected key remains pressed and the
beverage is dispensed.
Dispensing will stop automatically.
Beverage dispensing can be stopped before the set time by
pressing the same key again.

8.4 Dispensing of beverages - hot water

HOT WATER: GENERAL INSTRUCTIONS
Place the cup under dispenser (1) of the required group.
Dispensing can be dosed automatically or occur in continuous
mode (manually).
Dispensing with automatic dosing
Press one of the hot water dispending keys (12dt) correspond-
ing to the desired dose.
The programmed dose of hot water will pour from the dispenser
(1) and will stop automatically.
Note Dispensing may be stopped by pressing the (12dt) key.
Pressing the (12dt) key does not change the parameters set
during the programming phase.
Manual dispensing 12dt 12c
Press the hot water dispensing key (12c).
Hot water is dispensed continuously until the water key is
pressed again (12c) to stop it.
In some product configurations, hot water dispensing can occur
through the dispensing nozzle (1).
1
Hot water dispensing nozzle
.
62