LaCimbali Q10 New Touch Use And Installation page 24

Preset automatic washing cycle
Function - after each milk cycle has terminated, the timer
count-down starts (max 210'). At the end, "AUTOMATIC
WASHING" appears on the display, with the time remaining
before the wash cycle begins.
Activation - activation is automatic at the end of the
remaining 30" seconds. During this stand-by time:
if the coffee dispensing key is pressed, the timer count-
down will start again from 30" seconds before the end of
the dispensing cycle;
if the milk/cappuccino dispensing key is pressed, the timer
count-down will start from the set up time (210').
Selection block - always inactive. The wash cycle is
performed even if the user does not intervene.
Wash type - with milk or water, completely automatic.
Special conditions
1) with each washing cycle with detergent (at a preset time)
or daily washing cycle:
In this case, the entire circuit is washed. Therefore, during
the first milk dispensing procedure, the circuit is considered
free of residual milk and the timer (210') countdown is not
launched.
2) each time the machine is switched off while the timer
countdown (210') is underway:
when the machine is switched on again, if 210' have passed,
once the machine reaches its operating temperature, the
preset automatic washing cycle is launched and cannot be
stopped.
Automatic wash (if programmed)
Function - after each milk cycle has terminated, the timer
count-down starts (from 3 to 99 minutes, OFF disabled
function). At the end, "AUTOMATIC WASHING" appears
on the display, with the time remaining before the wash
cycle begins.
Activation - activation is automatic at the end of the
remaining 30" seconds. During this stand-by time:
if the coffee dispensing key is pressed, the timer count-
down will start again from 30" seconds before the end of
the dispensing cycle;
if the milk/cappuccino dispensing key is pressed, the timer
count-down will start from the set up time (3'÷99').
Selection block - always inactive. The wash cycle is
performed even if the user does not intervene.
Wash type - with water, completely automatic.
For more details, please consult the technical manual at the
"Configuration menu - wash options" paragraph.
9. Cleaning operations
69
Level 1
When the machine is blocked, and the following message
appears on the display:
MACHINE LOCKED WASH X
where "X" indicates the type of washing cycle requested.
Pressing the PRG (29) key and then the icon
washing options. The washing cycle starts if the key PRG (29)
is pressed when the cursor is on the requested washing line
or when the entry is pressed directly on the Touch Screen.
The washing cycle takes place and the machine is
unblocked.
Note: In the absence of washing messages and when
the machine is used frequently, washing cycles can
be performed at any time by following the instructions
described previously.
29
26
displays