Labels - LaCimbali Q10 New Touch Use And Installation

"i" Key
If the key " i " is pressed when any coffee, cappuccino,
water, or steam option is displayed, the dispensing process can
be started and the related parameters can be viewed.
The following will appear on the display screen:
TEST
F1 1
MM1 040
DV 000
TB 095.5°C
EN 071
In detail, the parameters displayed refer to:
F...: position of the limit switch (1 in position);
MM...: coffee dose pulses;
DV: volume dispenser pulses;
tG: dispensing time in seconds;
TB: coffee boiler temperature;
P: boiler pressure;
EN: encoder group.
"Label" means the phrase indicating the beverage that appears
on the dispensing key on the display:
COFFEE
CAPPUCCINO
This label can be personalized by selecting the label entry in
the machine's key menu.
The following appears on the display screen:
F2 1 F3 0
MM2 000
tG: 000s
P 1.6bar

17. Labels

Exiting the programming menu
Press the RES (24) key; every pressure of the key corrispond
to a return to the previous menu.
If the "Customer Progr." is set to "NO", the following message
will appear on the display:
CUSTOMER PROG.
NOT ENABLED
Key in what you want to appear on the dispensing key. The
label is overwritten, and you can see a preview of the string
at the top of the display screen.
Once the procedure has ended, save the new text by pressing
the icon, or leave the old label as is by pressing the
key.
80