6. Power the unit on and wait for the console to load
into the main workout screen. Once on the main
workout screen, tap the upper left corner of screen,
then the upper right corner of the screen, then the
upper left corner of the screen. The Password screen
will display (varies by model)
218
7. Enter password
The Service Menu will display.
8. Tap the Maintenance Mode button.
9. Select the model that the console is installed onto,
then press
.
10. Once the model has been selected, press
return to the main maintenance screen.
11. Tap the Calibration and Setup button.
, tap
.
to
Page 53