Star Trac StairMaster Core Health & Fitness 15" Capacitive Touch OpenHub Owner's Manual page 49

LOGGED DATA
When an error occurs, additional system data that represents the state of the system at the instance
the error occurs is recorded as an entry into a list of error log entries visible from the maintenance
mode. The total number of error log entries is 10. The makeup of the logged entry data that is com-
mon to all equipment configurations is defined in the following table:
Description Meaning/Definition
Error Code This is the error code mentioned in the Machine Error Codes section.
Operating Hours The total number of machine operating hours that have elapsed at the time the error occurs.
Operating The odometer distance of the machine at the time the error occurs
Distance in units that are dependent on the machine type.
Treadmill/Tread Climber Common Error Logged Data
In addition to the data listed in the previous Machine Error Common Logged Data section, the
treadmill and tread climber equipment configurations include more last error list data. The data
common to both of these equipment configurations is listed in the following table:
Description Meaning/Definition
Belt Target Speed The target speed of the belt in 10th's of a mph or kph (depending on units).
Instant Belt The instant target Pulse Width Modulated duty cycle value that is sent
Target PWM to the motor controller to control the target speed of the belt.
Belt Detected
The actual speed of the belt in 10th's of a mph or kph (depending on units).
Speed
Workout
Elapsed time in seconds of an ongoing workout at the time of the error.
Elapsed Time
Error Code received from Motor Controller at time of error (if applicable).
DFR code
See separate document for DFR error code listings.
Id of program being executed at the time of the error occurrence. The value
Program ID
matches the ID returned in response to the CSAFE command, cmdGetProgram.
Count of the total number of errors recorded by the system at the time this error is
Total Error Count recorded. Note that the number has been incremented to include this current error. The
number is also limited to a max of 9999. Beyond 9999, the number rolls over to 0.
Page 48