MAINTENANCE MODE
While in Maintenance Mode, the following information can be accessed and/or modified:
•
SW versions - The latest software version loaded in the system.
•
Serial Number - The last five digits of the display serial number.
•
Model - The product type (treadmill, bike, etc.).
•
Units - The units of measurement (English or Metric).
•
Language - The language that the messages are displayed in.
•
Max Time - The maximum time allowed for a single workout.
•
Weight - The default user weight used for Quick Start programs.
•
Oper Hours - The cumulative amount of usage hours.
•
Dist Logged - The cumulative distance logged.
•
Pause Time - Allows the manager/owner to select the length of the pause (30, 45, 60, 90, or 120 seconds).
•
Auto Fan - Allows the manager/owner to select the Auto Fans Functionality (ON or OFF).
•
Lock Out - Allows the manager/owner to select the Lock Out Function (ON or OFF).
•
Lock Out ID - Allows manager/owner to set a password for the Lock Out feature.
•
Max Speed (TM Only) - English (From 5.0 to 15.0) or Metric (From 5.0 to 24.1).
•
Accel Time (TM Only) - Allows the manager/owner to set the Acceleration Time of treadmill (From 25 to 60
seconds).
•
Decel Time (TM Only) - Allows the manager/owner to set the Deceleration Time of treadmill (From 20 to 60
seconds).
•
Club ID - Allows the manager/owner to set a Club ID.
•
PPD Enable (TM Only) - Allows the manager/owner to select the Person Present Detect function
•
PPD Timer (TM Only) - Allows the manager/owner to set the Person Present Detect detection timer of treadmill
(From 20s to 60s).
•
WD Enable (TM Only) - Debugging use only
F
. 10
- Maintenance Mode TM (default values shown)
ig
Page 31