Star Trac StairMaster Core Health & Fitness 15" Capacitive Touch OpenHub Owner's Manual page 45

3. Select the signal type from the Scan Mode option
(Both, Analog or Digital).
4. Select the region.
5. Select Cable Standard (depends on the country of
installation).
6. Press Start to begin the scan.
7. After the channel scan is completed, press Exit.
The Calibration and Setup screen appears.
8. Press to exit and go back to the Home
Screen.
Channels can be moved from one unit to another with an empty USB flash drive, preventing the
need to scan on every unit during an install. Procedures below:
Channel Export
1. Connect an empty USB thumb drive to the USB
port on the center console.
2. Wait until the USB source is recognized by the
system (USB icon will appear on the screen).
3. Navigate to the TV Setup screen and select
Export Channels.
4. A confirmation will appear when the export is
complete.
5. Press to exit and go back to the Home
Screen.
Page 44
F . 33 - Channel Dialog
ig
Channel Import
1. Connect the USB thumb drive that contains the
channel export to the USB port on the console.
2. Wait until the USB source is recognized by the
system (USB icon will appear on the screen).
3. Navigate to the TV Setup screen and select
Import Channels.
4. A confirmation will appear when the import is
complete.
5. Press to exit and go back to the Home
Screen.