INSTALLATION
TM FRAME
1. Use a #2 phillips screwdriver to secure the console
back shroud to the mast using eight (8) pieces each
of the #8-18 x 3/4" pan head screw (#110-3402) and
M4 washer #120-3307 .
Note: On 8-TR or 8-TRx with a Gen 1 Hotbar only,
install grommet 020-7884-XX as shown to the right.
B
A
2. Match and connect all cabling on the console. Please note cables needed will vary by unit.
Note: If installing on an:
It may have a consolidated cable instead of a pigtail cable which connects to the consolidated cable.
Complete details and directions for replacement on those frames can be found online at:
http://support.corehandf.com/620-8501
Page 50
8-TC
8-TH
ONLY
D
C
8-TR prior to serials TR9191L17130100 & TR9192L18020100
8-TRx
FOR 3RD
PARTY
ACCESSORY
H
G
L
I