Creating A Process Picture - Siemens SITOP PSU8200 Manual

7 Power supply system SITOP PSU8600
7.5

Creating a process picture

You need a process picture to visualize the status of the selectivity module.
The procedure is as follows:
1. Create a new process picture or open an existing one (1) in the folder of the
technological hierarchy in which the CFC plan that you edited before is located.
Fig. 7-10
2. Execute the Compile OS function so that the system creates the process
variables, the messages, and the block icon in the OS project.
3. Open the process picture using the WinCC Graphics Designer.
4. Draw the process picture as you want it to appear and position the block icon
of the PSU8600 (2) at the intended location in the picture.
5. Save the adapted process picture and close it.
Fig. 7-11
2
Integration of a SITOP 24 V Power Supply in PCS 7
Entry ID: 109481908, V1.0, 04/2016
1
56